..............................
            ..............................
            ..............................
            
Implementation of Multimode Fiber in Eight Channels Mimo Multiplexing System by
        
        In  recent  years,  with  the  swift  development  of  the  internet  industry,  people  urgently  necessitate  extra  capacity  and 
speedy network systems. Under this circumstance, optical fibers are becoming the most favourable delivering media as it has a 
major  important  role  in  the  information  business,  with  their  huge  bandwidth  and  excellent  transmission  performance. 
Dispersion  compensation  is  the  main  important  attribute  required  in  an  optical  fiber  communication  system  because  the 
presence of dispersion leads to pulse  spreading that causes the  output signal pulses to overlap. For a long-haul transmission 
system,  an  8x1  Wavelength  Division  Multiplexing Multi  Input  Multi  Output (WDM  MIMO)  channel  with  a  novel  dispersion 
compensation  system has  been  designed.  Various  dispersion  compensation  techniques  are  explored  in  this  work,  including 
dispersion-compensating  fibers,  fiber  Bragg  grating,  Ideal  compensation  Bragg  grating,  and  opti-grating,  with  a  2.5  Gbit/s 
data  rate  for  each  channel.  With  a power  of  20  dBm,  the  proposed  model  is  simulated  with  32768  samples.  The  length  of  an 
optical  fibre  can  range  from  5  to  100  kilometres.  Throughout  the  simulation,  the  operation  frequency  is  193.1  THz.  The 
software  opti-system-17.0  was  used  to  design  and  implement  the  system.  The  8-channel  device  was  used  to  simulate  and 
calculate  metrics  such  as  Q-factor,  Bit  Error  Rate  (BER),  and  Signal  to  Noise  Ratio  (SNR).  The  proposed  model  enhances 
performance in terms of BER and quality factor at the receiver end of systems.    
            [1] Ahmed A., Singh A., Singh A., and Kaur S., “Performance Analysis of WDM-MIMO Free Space Optical System Under Atmospheric Turbulence,” in Proceeding of 6th International Conference on Signal Processing and Integrated Networks, Noida, pp. 820-825, 2019.
[2] Amiri I., Rashed A., Kader H., Al-Awamry A., El-Aziz I., Yupapin P., and Palai G., “Optical Communication Transmission Systems Improvement Based on Chromatic and Polarization Mode Dispersion Compensation Simulation Management,” Optik, vol. 207, pp. 163853, 2019.
[3] Anita H., Karpagarajesh G., Princy S., Jenefer W., and Martina M., “Assessment of Rz and Nrz Coders in Free Space Multiplexing System with Reduced Attenuation Effect and Increased Q Factor,” Our Heritage, vol. 68, no. 1, pp.8930- 8936, 2020.
[4] Bandyopadhyay S., Shao L., Wang C., Liu S., Wu Q., Gu G., Hu J., Liu Y., Chen X., Song Z., Song X., Bao Q., and Smietana M., “Study on Optimization of Nano-Coatings for Ultra- Sensitive Biosensors Based on Long-Period Fiber Grating,” Sensing and Bio-Sensing Research, vol. 27, pp. 100320, 2020.
[5] Bobrovs V., Spolitis S., and Ivanovs G., “Comparison of Chromatic Dispersion Compensation Techniques for WDM-PON Solution,” in Proceeding of 2nd Baltic Congress on Future Internet Communications, Vilnius, pp. 64-67, 2012.
[6] Chen W., Li S., Lu P., Wang D., and Luo W., “Dispersion Compensation Optical Fiber Modules for 40 Gbps WDM Communication Systems,” Frontiers of Optoelectronics in China, vol. 3, no. 4, pp. 333-338, 2010.
[7] Dar A. and Jha R., “Chromatic Dispersion Compensation Techniques and Characterization of Fiber Bragg Grating for Dispersion Compensation,” Optical and Quantum Electronic, vol. 47, no. 3, pp. 1-35, 2017.
[8] Dasan M., Francis F., Sarath K., Dipin E., and Srinivas T., Optically Multiplexed Systems: Wavelength Division Multiplexing, Multiplexing, IntechOpen, 2019.
[9] Eggleton B., Stephens T., Krug P., Dhosi G., Brodzeli Z., and Ouellette F., “Dispersion Compensation Using A Fibre Grating in Transmission,” Electronics Letters, vol. 32, no. 17, pp. 1610-1611, 1996.
[10] Fazea Y., Amphawan A., Al-Gumaei Y., Al- Samman A., and Al-Rahmi W., “Modes Power Equalization Based-Singular Value Decomposition in Mode Division Multiplexing Systems for Multi-Hungry Bandwidth Applications,” Optical Fiber Technology, vol. 61, pp.102389, 2021.
[11] Hussein T., Rizk M., and Aly M., “A Hybrid DCF/FBG Scheme for Dispersion Compensation Over A 300 Km SMF,” Optical and Quantum Electronics, vol. 51, no. 4, pp .103, 2019.
[12] Karpagarajesh G. and Anita H., “Maximizing the Area Spanned by the Optical SNR of the 5G Using Digital Modulators and Filters,” The International Arab Journal of Information Technology, vol. 18, no. 3, pp. 306-311, 2021.
[13] Kaur P., Gupta A., and Chaudhary M., “Comparative Analysis of Inter Satellite Optical Wireless Channel for NRZ And RZ Modulation Formats for Different Levels of Input Power,” Procedia Computer Science, vol. 58, pp. 572-7, 2015.
[14] Kaur R. and Singh M., “Analysis on Dispersion Compensation with DCF Based on Optisystem-A Review,” An International Journal of Engineering Science, vol. 17, pp. 390-395, 2016.
[15] Khatoon S., Jaiswal A., and Agrawal A., “Performance Evaluation of Post and Symmetrical DCF technique with EDFA in 32×10, 32×20 and 32×40 Gbps WDM Systems,” International Journal of Current Engineering and Technology, vol. 7, no 4, pp. 1416-1420, 2017.
[16] Meena M. and Gupta R., “Design and Comparative Performance Evaluation of Chirped FBG Dispersion Compensation with DCF Technique for DWDM Optical Transmission Systems,” Optik, vol. 188, pp. 212-224, 2019.
[17] Panda T., Mishra R., Parakram K., and Sinha A., “Performance Comparison of Dispersion Compensation in A Pre, Post and Symmetrical Arrangement using DCF for Long Haul Optical Communication,” An International Journal of Engineering and Technology, vol. 3, no. 7, pp. 14-20, 2016.
[18] Poonkuzhali M. and Prakash P., “Analysis of Electronic Dispersion Compensation for 10 Gbps Using Equalizer,” in Proceeding of Innovations in Power and Advanced Computing Technologies, Vellore, pp. 1-5, 2019.
[19] Rajesh k., Blessie A., and Krishnan S., “Performance Assessment of Dispersion Compensation using Fiber Bragg Grating (FBG) and Dispersion Compensation Fiber (DCF) Techniques,” Informacije Midem, vol. 51, no. 4, pp. 215-223, 2021.
[20] Rendi Rahmadhan S., Effect of Weather on Performance of Free Space Optic System with Implementation of Multimode Fiber in Eight Channels Mimo Multiplexing System… 931 Mimo Ss-Wdm Technology Doctoral Dissertation, Thesis, Universitas Islam Negeri Sultan Syarif Kasim Riau, 2019.
[21] Sawant R., Bhumkar P., Zhu A., Ni P., Capasso F., and Genevet P., “Mitigating Chromatic Dispersion with Hybrid Optical Metasurfaces,” Advanced Materials, vol. 31, no. 3, pp. 1805555, 2019.
[22] Sharma A., Singh I., Bhattacharya S., and Sharma S., “Performance Comparison of DCF and FBG as Dispersion Compensation Techniques at 100 Gbps Over 120 km Using SMF,” in Proceeding of Nanoelectronics, Circuits and Communication Systems, pp. 435- 449, 2019. Guruviah Karpagarajesh is currently working as an Assistant Professor in the Department of Electronics and Communication Engineering at Government College of Engineering, Tirunelveli, Tamil Nadu, India. He has obtained B.E- ECE from P.S.N.A College of Engineering and Technology, Dindigul, in the year 2002.He obtained his M.E Optical Communication from ACGCET, Karaikudi, in the year 2005. He has obtained his Ph.D from Anna University, Chennai, in the year June 2017. He has 16 years of experience in the field of Teaching. His area of interest is Optical Communication.
